What a desktop review is for
None of this replaces a survey, an engineer or a call to the city. It tells you whether the site is worth those things.
Go in the order below. The first four items kill the most sites, so check them first.
1. Flood zone
Check the FEMA flood map first, because it is the fastest way to lose a site. Look for the 1% annual chance flood area, often called the 100-year floodplain, and the floodway inside it.
Building in the floodplain is sometimes possible at a cost. Building in the floodway usually is not.
One caution: an area with no mapped flood data is not the same as an area with no flood risk.
2. Wetlands
Look at the National Wetlands Inventory. If it shows wetlands on the site, budget time and money for a delineation.
The inventory is a screening tool. It misses some wetlands and shows some that are no longer there, so treat it as a flag and not a ruling.
3. Topography
Pull contours for the site. You want to know three things:
- How much the ground falls from one side to the other.
- Which way the water runs.
- Whether there is a flat area big enough for what you want to build.
Two foot contours are a good default. Tight lines mean steep ground and more grading cost.
In MapRE you outline the site and pick 1, 2, 5 or 10 foot contours. They are drawn from USGS elevation data for any area up to 500 acres.
4. Zoning
Find the zoning district and read what it allows. Check the use first, then setbacks, height and parking.
A zoning map tells you the district. The city's code tells you what the district means.
Always confirm with the planning department, because maps lag behind rezonings.